BXMT4238

Gravity Feed - Towable/Self-Contained

COMPARE

$17,500.00 CAD

Plus Shipping Charges

IN STOCK NEAR YOU

CALL TO RESERVE

Dealership	Colour	Qty

YOUR NEAREST DEALERS

Pick up and go wherever you need it. Ideal for keeping job sites clean and tidy, Contractors, Arborists and Municipalities can easily chip or mulch branches into vehicles and haul them away with the trailer style BXMT Chipper / Shredders.

Chipping Capacity:	4" (10 cm)
Shredding Capacity:	2" (5 cm)
Chipper Type:	Disc
Feed System:	Gravity
Shredder Type:	Hammer Mill
Engine:	Kohler® 35 hp (999 cc)
Chipper Hopper Opening:	18" x 18" (45 cm x 45 cm)
Chipper Rotor Opening:	4" x 10" (10 cm x 25 cm)
Shredder Hopper Opening:	33" x 40" (84 cm x 102 cm)
Shredder Housing Opening:	11" x 11" (27 cm x 27 cm)
Number of Chipper Knives:	2
Number of Shredder Knives:	30
Rotor Diameter:	25" (64 cm)
Rotor Weight :	170 lbs (77 kg)
Discharge Chute Height:	64" (163 cm)
Discharge Chute Rotation:	360°
Drive System:	Centrifugal Clutch, Belt Drive
Engine Speed:	3600
Rotor Speed:	1200
Tires:	6.50 X 8
Total Weight:	1080 lbs (490 kg)
Dimensions (LxWxH):	88.5" x 64" x 79.5" (225 cm x 163 cm x 202 cm)

+ Adjustable Discharge Chute

Control the output of the chipper with the easily adjustable chute allowing the user to direct the flow of chips where they want.

+ Angled Rotor

Angling the log against the rotor requires less horsepower to chip, saving fuel.

+ Built In Toolbox

Keep your small tools and replacement parts handy.

+ Choose Your Colour

With Wallenstein you have a choice. Products are available in seven solid colors as well as Realtree EDGE™ and Realtree EDGE™ Shadows camouflage. Additional charges apply for Realtree camouflage.

+ Chop-Block Technology

Provides a counter-ledge for shredder knives to efficiently chop material against.

+ Electric Start

Reliable and convenient starting at the turn of a key.

+ Highway Towable

Transport your unit with hitch, safety chains, highway tires, and full trailer lighting.

+ Integrated Shredder Hopper

After chipping larger branches, efficiently feed twigs and leaves through the shredder intake.

+ Oversized Heavy Duty Rotor

Extra large chipper intake backed up by extra large rotor spinning with high momentum.

+ Positional Discharge Deflector

The discharge chute is equipped with a positional discharge deflector on the end of the chute to direct the chips exactly where desired.

+ Reversible Rotor Knives

Standard reversible rotor knives double the longevity of your knives.

+ Torflex® Suspension Axle

Axles are designed to absorb road impact, providing a smoother towing experience.

+ Twig Breaker

The discharge paddle passes around the twig breaker and helps to break the material into smaller pieces and turn it into mulch.

+ Hitch Extension W4202 $80.00 CAD

12” extension for use with a 2” ball hitch. This accessory is necessary to tow the machine with an all-terrain vehicle (ATV).

+ Ledger Knife 1011M104 $79.00 CAD

Replacement ledger knife

+ Ledger Knife Clearance Gauge 1012L269 $28.00 CAD

Easily set the correct clearance when you change or adjust the ledger knife or rotor knives.

+ Reversible Rotor Knife 1011M103 $90.00 CAD

Replacement reversible rotor knife

+ Shredder Knife 1016M608 $16.00 CAD

Replacement shredder knife.

+ Spark Arrestor - Vanguard® Z47920 $86.00 CAD

A mechanical device that traps exhaust particles that are expelled from an internal combustion engine. Spark arrestors are required by law in some regions. It is the responsibility of the operator to comply with the local laws and regulations.