GX620

Backhoes - Tractor or Skidsteer

COMPARE

Manufacturer's Suggested retail price shown. Subject to taxes and applicable dealer fees. $250 price premium for Realtree EDGE™ camouflage.

$7,950.00 CAD

Price does not include mounting kit or bucket.

Check Availability

IN STOCK NEAR YOU

CALL TO RESERVE

Dealership	Colour	Qty

YOUR NEAREST DEALERS

Learn how to build your Backhoe Package here

Digging Depth:	6' 4" (193 cm)
Engine HP Range (Tractor):	20 - 40
Engine HP Range (Skidsteer):	20 - 50
Required Hydraulic Flow:	4 - 12 gpm (15 - 45 lpm)
Stabilizer Width (Spread) :	74" (188 cm)
Main Boom Cylinder Diameter :	2.5" (64 mm)
Dipper Cylinder Diameter :	2.25" (57 mm)
Bucket Cylinder Diameter:	2.25" (57 mm)
Number of Swing Cylinders:	2
Swing Cylinder Diameter:	2" (51 mm)
Stabilizer Cylinder Diameter:	2" (51 mm)
Reach from Swing Post :	100" (254 cm)
Includes Flow Divider:	No
Bucket Rotation:	180°
Swing Arc:	180°
SAE* Dipper Boom Digging Force:	1250 lbs (567 kg)
SAE* Bucket Digging Force:	2600 lbs (1179 kg)
Boom Lift Capacity:	385 lbs (175 kg)
Ground Clearance:	10.5" (27 cm)
Loading Height:	62" (158 cm)
Overall Operating Height (Fully Raised):	92" (234 cm)
Total Weight:	575 lbs (261 kg)
Transport Dimensions (LxWxH):	68" x 40" x 63" (173 cm x 102 cm x 160 cm)
Operating Pressure:	1800 psi (12411 kPa)
Mounting System:	Subframe, Mini Skidsteer Universal Plate, PT302 (Cat I)

+ 3-Point Hitch Mount

Turn your tractor into a backhoe with the simple 3-point hitch mount. The 3-point hitch also utilizes your tractor’s draw bar for increased rigidity.

+ Choose Your Colour

With Wallenstein you have a choice. Products are available in seven solid colors and Realtree EDGE™camouflage. $250 price premium for Realtree EDGE™ camouflage.

+ Curved Boom

Protects backhoe from unnecessary damage while preventing ground from falling back into the hole.

+ Dual Swing Cylinders

Dual cylinders provide strong, consistent movement throughout the entire 180-degree range.

+ Greaseable Pins

Maintenance is easy with greasable pins on all pivot points.

+ Hardened Steel Bushings

To reduce wear, hardened steel bushings are installed on all the main pivot points.

+ Hydraulic Stabilizers

Easy to use hydraulic stabilizers help to prevent tipping.

+ Replaceable Teeth

Our pin-on bucket teeth allow you to swap out worn or damaged teeth and get back to work as soon as possible.

+ Skidsteer Mount

The universal quick attach plate connects easily to most skidsteers.

+ Subframe Mounting

Allows your tractor to safely handle the stresses developed by digging with a backhoe attachment.

+ Swing Cushioning

When swinging the boom to the extreme ends, hydraulic cushioning gracefully brings the boom to a controlled stop.

+ 12" Bucket BK2612 $560.00 CAD

3 teeth Bucket volume: 0.7 cubic ft

+ 15" Bucket BK2615 $590.00 CAD

4 teeth Bucket volume: 0.9 cubic ft

+ 18" Bucket BK2618 $610.00 CAD

4 teeth Bucket volume: 1.1 cubic ft

+ 9" Bucket BK2609 $500.00 CAD

3 teeth Bucket volume: 0.5 cubic ft

+ Cat I 3PH Mount PT302 $770.00 CAD

Cat I: For older low HP tractors which have no subframe available. Light duty only.

+ Mechanical Thumb BT5280 $550.00 CAD

Clamp on mechanical thumb

+ Mini Skidsteer Mount Mini Skids $1,720.00 CAD

Mounting Plate & Tieback (Please Specify Tieback Part Number When Ordering)

+ PTO Pump Kit PTO62 $1,500.00 CAD

Required when mounting a Wallenstein backhoe on a tractor which has no or limited hydraulics and will provide 7 gpm flow sufficient to power the backhoe. The PTO Pump Kit consists of a PTO mounted hydraulic pump, hydraulic tank with return hose, fittings and hardware.

+ Street Pad Kit BP210 $230.00 CAD

Keep the stabilizer teeth from tearing up your driveway.

+ Subframe (Specify Part Number When Ordering) Subframe $1,500.00 CAD

Some tractors have the required horsepower to operate a backhoe but do not have the structural strength to handle the stresses a backhoe will place on the tractor frame. To solve that problem a backhoe subframe is required to strengthen and distribute the stress more evenly along the entire frame.