[Skip to Content]
Wallenstein Logo

Your Cart


WP1624-24

$62,450.00 CAD

Towable
Split Force
Load, Cut, Split
Hydraulic Saw

20 ton split force, the WP1624-24 towable wood processor (24' integrated conveyor) is commercially designed to load, block, split, and pile without wasting time and when time is money. The controls are at your fingertips and when processing cords of wood is your game, the WP1624-24 is your tool to get the job done fast.

Request a Demo

Print Specs
Split Force 20 Ton
On-Board Intelligence P3 Pulse™
Engine Vanguard® 40 hp (993 cc) EFI
Split Opening 26" (66 cm)
Average Cut to Cut Cycle Time 12 Seconds
Full Stroke Splitting Cycle Time 6.5 Seconds
Cylinder Diameter 4" (10 cm)
Recommended Log Diameter 16" (31 cm)
Maximum Log Diameter 18" (46 cm)
Maximum Log Length 192" (488 cm)
Log Trough Length 150" (381 cm)
Log Deck Type Folding Two-Stage Live Deck
Log Deck Length 70" (178 cm)
Log Deck Width 72" (183 cm)
Log Deck Height 53" (135 cm)
Saw Bar Oregon® 25" (64 cm) Harvester Bar
Saw Chain 18HX 0.404
Saw Drive Hydraulic Gear Motor
Bar Oiler Automatic
Saw Bar Oil Reservoir Capacity 1.5 US gal (5.6 l)
Hydraulic Pump - Stage 1 14 gpm (53 lpm)
Hydraulic Pump - Stage 2 7.75 gpm (29.3 lpm)
Hydraulic Pump - Stage 3 4.15 gpm (15.7 lpm)
Splitter Chute Clearance 20" (51 cm)
Throughput Up to 3.5 Cords Per Hour
Tires ST205/75R15
Hitch 2" Ladder Style Ball Coupler
Tongue Weight 480 lbs (218 kg)
Total Weight 3700 lbs (1450 kg)
Dimensions Open (LxWxH) 232" x 114" x 76" (589 cm x 289 cm x 193 cm)
Dimensions Folded (LxWxH) 232" x 66" x 105" (589 cm x 167 cm x 266 cm)
Hydraulic Capacity 26 US gal (102 l)
Fuel Tank Capacity 10 US gal (38 l)
Included Conveyor 24' Self-contained Hydraulic Conveyor
Black
Blue
Orange
Red
Yellow
Grey
Green
Realtree APX® Camo
Realtree EDGE® Shadows Camo
LIMITED WARRANTY
Effective on products retailed on or after January 1, 2015.
Wallenstein products are warranted to be free of defects in materials and
workmanship under normal use and service, for a period of
Five Years for Consumer Use
Two Years for Commercial/Rental Use
Three Years or 2000 hours for CR models
from the date of purchase, when operated and maintained in accordance with the operating and maintenance instructions supplied with the unit. Warranty is limited to the repair of the product and/or replacement of parts.
This warranty is extended only to the original purchaser and is not transferable.
Repairs must be done by an authorized dealer. Products will be returned to the dealer at the customer’s expense. Include the original purchase receipt with any claim.
This warranty does not cover the following:
1) Normal maintenance or adjustments
2) Normal replacement of wearable and service parts
3) Consequential damage, indirect damage, or loss of profits
4) Damages resulting from:
• Misuse, negligence, accident, theft or fire
• Use of improper or insufficient fuel, fluids or lubricants
• Use of parts or aftermarket accessories other than genuine Wallenstein parts
• Modifications, alteration, tampering or improper repair performed by parties other than an authorized dealer
• Any device or accessories installed by parties other than an authorized dealer
5) Engines. Engines are covered by the manufacturer of the engine for the warranty period they specify. For the details of your engine warranty, see your engine owner’s manual. The owner is responsible for registering the engine with the appropriate engine manufacturer or distributor, as outlined in the Engine Owner’s Manual which accompanied your Wallenstein product. All warranty work must be done by one of the engine manufacturer’s approved servicing dealers.