XInternational (en)
Canada
United States
International
Wood Chippers
Chipper/Shredders
Log Splitters
Firewood Processors & Conveyors
Skidding Winches & Plates
Log Grapples
Log Loader Trailers
Backhoes & Skid Diggers
Manure Spreaders
Price does not include mounting kit or bucket.
+ 3-Point Hitch Mount
Turn your tractor into a backhoe with the simple 3-point hitch mount. The 3-point hitch also utilizes your tractor’s draw bar for increased rigidity.
+ Choose Your Colour
With Wallenstein you have a choice. Products are available in seven solid colors as well as Realtree EDGE™ and Realtree EDGE™ Shadows camouflage. Additional charges apply for Realtree camouflage.
+ Curved Boom
Protects backhoe from unnecessary damage while preventing ground from falling back into the hole.
+ Dual Swing Cylinders
Dual cylinders provide strong, consistent movement throughout the entire 180-degree range.
+ Greaseable Pins
Maintenance is easy with greasable pins on all pivot points.
+ Hardened Steel Bushings
To reduce wear, hardened steel bushings are installed on all the main pivot points.
+ Hydraulic Stabilizers
Easy to use hydraulic stabilizers help to prevent tipping.
+ Replaceable Teeth
Our pin-on bucket teeth allow you to swap out worn or damaged teeth and get back to work as soon as possible.
+ Skidsteer Mount
The universal quick attach plate connects easily to most skidsteers.
+ Subframe Mounting
Allows your tractor to safely handle the stresses developed by digging with a backhoe attachment.
+ Swing Cushioning
When swinging the boom to the extreme ends, hydraulic cushioning gracefully brings the boom to a controlled stop.
+ 12" Bucket BK2612 $0.00
3 teeth Bucket volume: 0.7 cubic ft
+ 15" Bucket BK2615 $0.00
4 teeth Bucket volume: 0.9 cubic ft
+ 18" Bucket BK2618 $0.00
4 teeth Bucket volume: 1.1 cubic ft
+ 9" Bucket BK2609 $0.00
3 teeth Bucket volume: 0.5 cubic ft
+ Cat I 3PH Mount PT302 $0.00
Cat I: For older low HP tractors which have no subframe available. Light duty only.
+ Mechanical Thumb BT5280 $0.00
Clamp on mechanical thumb
+ Mini Skidsteer Mount Mini Skids $1,720.00
Mounting Plate & Tieback (Please Specify Tieback Part Number When Ordering)
+ PTO Pump Kit PTO62 $0.00
Required when mounting a Wallenstein backhoe on a tractor which has no or limited hydraulics and will provide 7 gpm flow sufficient to power the backhoe. The PTO Pump Kit consists of a PTO mounted hydraulic pump, hydraulic tank with return hose, fittings and hardware.
+ Street Pad Kit BP210 $0.00
Keep the stabilizer teeth from tearing up your driveway.
+ Subframe (Specify Part Number When Ordering) Subframe $1,895.00
Some tractors have the required horsepower to operate a backhoe but do not have the structural strength to handle the stresses a backhoe will place on the tractor frame. To solve that problem a backhoe subframe is required to strengthen and distribute the stress more evenly along the entire frame. Wallenstein Equipment makes every effort to design subframes that fit correctly. However, it may be necessary to modify the subframe at the time of installation due to ongoing tractor manufacturer design changes.
Product specifications are subject to change and may not be as shown.
For Installation of Wallenstein Backhoe Products on Category I Tractors. Adapts GX620 & GX720 Wallenstein Backhoe products for three-point hitch installation.
Wallenstein PTO Hydraulic Pump Kit is required when mounting a Wallenstein backhoe on a tractor which has no or limited hydraulics and will provide a 7GPM flow sufficient to power the back hoe. The PTO62 is used when mounting a GX620 Wallenstein backhoe, and the PTO72 is used when mounting a GX720, GX920 or GX920XT Wallenstein backhoe.
Covers Thumb Kits: BT5230, BT5250, BT5260, BT5270, BT5280, BT5290, BT5300, BT5310 & BT5320
What brand is your ATV?
What model of ATV is it?
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
View PDF