With a PTO powered rotor and hydraulic feed hopper, branches, limbs and brush up to 10" in diameter are control fed for continuous chipping at maximum capacity.
||10" (25 cm)
||Dual Hydraulic Roller Feed
|Engine HP Range:
||80 - 120
|Required Hydraulic Flow:
||4 - 8 gpm (15 - 30 lpm)
|Chipper Hopper Opening:
||30" x 42" (76 cm x 107 cm)
|Chipper Housing Opening:
||10" x 17" (25 cm x 43 cm)
|Number of Chipper Knives:
||36” (92 cm)
|Rotor Weight :
||425 lbs (193 kg)
|Discharge Chute Height:
||100" (253 cm)
|Discharge Chute Rotation:
|Winch Pulling Capacity:
||1200 lbs (545 kg)
|Winch Rope Length:
||50' (15 m)
|Winch Rope Diameter:
||1/4" (6 mm)
||PTO Direct Drive
||540 - 1000
||34" (86 cm)
||2100 lbs (953 kg)
|Dimensions Open (LxWxH):
||108" x 85" x 100" (273 cm x 215 cm x 253 cm)
|Dimensions Folded (LxWxH):
||85" x 71" x 100" (215 cm x 180 cm x 253 cm)
||Cat II, iMatch™ & Quick Hitch Compatible
1200 lbs pulling force along with a 50’ synthetic rope makes it very easy to winch in your heavy log.
Control the output of the chipper with the easily adjustable chute allowing the user to direct the flow of chips where they want.
Angling the log against the rotor requires less horsepower to chip, saving fuel.
Keeps wood chips from getting into the bearing and causing damage.
Easily attach to your tractor without leaving your seat.
With Wallenstein you have a choice. Products are available in seven solid colors and Realtree EDGE™camouflage. $250 price premium for Realtree EDGE™ camouflage.
Hydraulically powered top and bottom feed rollers grip and pull brush directly into the chipper.
For easy transport. No tools required.
Extra large chipper intake backed up by extra large rotor spinning with high momentum.
Extra large chipper intake easily receives crooked branches, reducing the amount of prior trimming required.
The discharge chute is equipped with a positional discharge deflector on the end of the chute to direct the chips exactly where desired.
Threaded eyebolts allow positive fine positioning of ledger plate.
Standard reversible rotor knives double the longevity of your knives.
Forward/reverse control with two stop positions.
Move on from a power spike by simply replacing a single shear bolt.
Hydraulic cylinder lifts the top roller then applies 2600 lbs of crush force to start the log through the chipping cycle.
The discharge paddle passes around the twig breaker and helps to break the material into smaller pieces and turn it into mulch.
Available in black only. 1000 rpm recommended PTO speed for discharge height extension.
Available in black only. 1000 rpm required PTO speed for biomass kit. Optional PTO shafts for tractors using 21 spline PTO at 1000 rpm.
Replacement ledger knife.
Take out the guesswork when changing and adjusting your knives.
Series B8 x 40" x 21 spline.
Reversible rotor knives double the longevity of your knives.
Eliminates the need for hydraulics from your tractor.
BX Series 3 Point Hitch Chipper Operators Manual (BX32, BX42R, BX42S, BX62R, BX62S & BX92R, BX92S)
BX Series 3 Point Hitch Chipper Manual (after January 2013-BX32, BX42R, BX42S, BX62R, BX62S & BX92)
BX "R" Series 3PH Roller Feed Chipper Operators Manual (BX102R,RI,RP,RPI & BX72R,RI & BX52R,RI)
BX R-Series 3PH Roller Feed Chipper Operators Manual (52R–S/N 152R559 & Up, 72R–S/N 172R240 & Up, 102R–110R215 & Up)
BX R-Series 3 PH Roller-feed Chipper with P3 Pulse Operators Manual
Uncrating & Setup
PTO Shaft – Sizing and Installation
Submit Warranty Registration