XUnited States (en)
Firewood Processors & Conveyors
Skidding Winches & Plates
Log Loader Trailers
Backhoes & Skid Diggers
PLUS SHIPPING CHARGES
Price does not include seat, mounting kit, or bucket.
+ Choose Your Colour
With Wallenstein you have a choice. Products are available in seven solid colors as well as Realtree EDGE™ and Realtree EDGE™ Shadows camouflage. $250 price premium for Realtree camouflage.
+ Curved Boom
Protects backhoe from unnecessary damage while preventing ground from falling back into the hole.
+ Greaseable Pins
Maintenance is easy with greasable pins on all pivot points.
+ Hydraulic Stabilizers
Easy to use hydraulic stabilizers help to prevent tipping.
+ Replaceable Teeth
Our pin-on bucket teeth allow you to swap out worn or damaged teeth and get back to work as soon as possible.
+ Subframe Mounting
Allows your tractor to safely handle the stresses developed by digging with a backhoe attachment.
+ Swing Cushioning
When swinging the boom to the extreme ends, hydraulic cushioning gracefully brings the boom to a controlled stop.
+ 12" Bucket BK2612
3 teeth Bucket volume: 0.7 cubic ft
+ 15" Bucket BK2615
4 teeth Bucket volume: 0.9 cubic ft
+ 18" Bucket BK2618
4 teeth Bucket volume: 1.1 cubic ft
+ 9" Bucket BK2609
3 teeth Bucket volume: 0.5 cubic ft
+ Mechanical Thumb BT5280
Clamp on mechanical thumb
+ Operator's Seat BT7251
Required when no spin around seat available.
+ PTO Pump Kit PTO605
Required when mounting a Wallenstein backhoe on a tractor which has no or limited hydraulics and will provide 5 gpm flow sufficient to power the backhoe. The PTO Pump Kit consists of a PTO mounted hydraulic pump, hydraulic tank with return hose, fittings and hardware.
+ Street Pad Kit BP220
Keep the stabilizer teeth from tearing up your driveway.
+ Subframe (Specify Part Number When Ordering) Subframe
Some tractors have the required horsepower to operate a backhoe but do not have the structural strength to handle the stresses a backhoe will place on the tractor frame. To solve that problem a backhoe subframe is required to strengthen and distribute the stress more evenly along the entire frame.
Wallenstein Equipment makes every effort to design subframes that fit correctly. However, it may be necessary to modify the subframe at the time of installation due to ongoing tractor manufacturer design changes.
Product specifications are subject to change and may not be as shown.
Covers Thumb Kits: BT5230, BT5250, BT5260, BT5270, BT5280, BT5290, BT5300, BT5310 & BT5320
What brand is your ATV?
What model of ATV is it?