[Skip to Content]
Wallenstein Logo

XUnited States (en)

choose region and language

United States Map

United States

International Map



Backhoes - Tractor or Skidsteer
msrp popup icon

$9,200.00 USD


Learn how to build your Backhoe Package here
Digging Depth: 6' 4" (193 cm)
Engine HP Range (Tractor): 20 - 40
Engine HP Range (Skidsteer): 20 - 50
Required Hydraulic Flow: 4 - 12 gpm (15 - 45 lpm)
Stabilizer Width (Spread) : 74" (188 cm)
Main Boom Cylinder Diameter : 2.5" (64 mm)
Dipper Cylinder Diameter : 2.25" (57 mm)
Bucket Cylinder Diameter: 2.25" (57 mm)
Number of Swing Cylinders: 2
Swing Cylinder Diameter: 2" (51 mm)
Stabilizer Cylinder Diameter: 2" (51 mm)
Reach from Swing Post : 100" (254 cm)
Includes Flow Divider: No
Bucket Rotation: 180°
Swing Arc: 180°
SAE* Dipper Boom Digging Force: 1250 lbs (567 kg)
SAE* Bucket Digging Force: 2600 lbs (1179 kg)
Boom Lift Capacity: 385 lbs (175 kg)
Ground Clearance: 10.5" (27 cm)
Loading Height: 62" (158 cm)
Overall Operating Height (Fully Raised): 92" (234 cm)
Total Weight: 575 lbs (261 kg)
Transport Dimensions (LxWxH): 68" x 40" x 63" (173 cm x 102 cm x 160 cm)
Operating Pressure: 1800 psi (12411 kPa)
Mounting System: Subframe, Mini Skidsteer Universal Plate, PT302 (Cat I)

Turn your tractor into a backhoe with the simple 3-point hitch mount. The 3-point hitch also utilizes your tractor’s draw bar for increased rigidity.

With Wallenstein you have a choice. Products are available in seven solid colors as well as Realtree EDGE™ and Realtree EDGE™ Shadows camouflage. $250 price premium for Realtree camouflage.

Protects backhoe from unnecessary damage while preventing ground from falling back into the hole.

Dual cylinders provide strong, consistent movement throughout the entire 180-degree range.

Maintenance is easy with greasable pins on all pivot points.

To reduce wear, hardened steel bushings are installed on all the main pivot points.

Easy to use hydraulic stabilizers help to prevent tipping.

Our pin-on bucket teeth allow you to swap out worn or damaged teeth and get back to work as soon as possible.

The universal quick attach plate connects easily to most skidsteers.

Allows your tractor to safely handle the stresses developed by digging with a backhoe attachment.

When swinging the boom to the extreme ends, hydraulic cushioning gracefully brings the boom to a controlled stop.

3 teeth Bucket volume: 0.7 cubic ft

4 teeth Bucket volume: 0.9 cubic ft

4 teeth Bucket volume: 1.1 cubic ft

3 teeth Bucket volume: 0.5 cubic ft

Cat I: For older low HP tractors which have no subframe available. Light duty only.

Clamp on mechanical thumb

Mounting Plate & Tieback (Please Specify Tieback Part Number When Ordering)

Required when mounting a Wallenstein backhoe on a tractor which has no or limited hydraulics and will provide 7 gpm flow sufficient to power the backhoe. The PTO Pump Kit consists of a PTO mounted hydraulic pump, hydraulic tank with return hose, fittings and hardware.

Keep the stabilizer teeth from tearing up your driveway.

Some tractors have the required horsepower to operate a backhoe but do not have the structural strength to handle the stresses a backhoe will place on the tractor frame. To solve that problem a backhoe subframe is required to strengthen and distribute the stress more evenly along the entire frame.

Wallenstein Equipment makes every effort to design subframes that fit correctly. However, it may be necessary to modify the subframe at the time of installation due to ongoing tractor manufacturer design changes.

Product specifications are subject to change and may not be as shown.

Operator Manuals

GE and GX Rancho Series Operator's Manual download file View PDF

GE and GX Series Backhoe Operator's Manual download file View PDF

For Installation of Wallenstein Backhoe Products on Category I Tractors. Adapts GX620 & GX720 Wallenstein Backhoe products for three-point hitch installation.

PT300 Three-Point Hitch Adaptor Kit Installation Instructions - Class I Tractors download file View PDF

Wallenstein PTO Hydraulic Pump Kit is required when mounting a Wallenstein backhoe on a tractor which has no or limited hydraulics and will provide a 7GPM flow sufficient to power the back hoe. The PTO62 is used when mounting a GX620 Wallenstein backhoe, and the PTO72 is used when mounting a GX720, GX920 or GX920XT Wallenstein backhoe.

PTO62 and PTO72 PTO Pump Kit for Backhoes - Installation Instructions download file View PDF

Parts Manuals

Covers Thumb Kits: BT5230, BT5250, BT5260, BT5270, BT5280, BT5290, BT5300, BT5310 & BT5320

Backhoe Thumb Option Breakdowns download file View PDF

Prior to S/N 360271 download file View PDF
S/N 360271 to 3620513 download file View PDF
S/N 3620514 & up download file View PDF

Uncrating & Setup

GE-GX Backhoe Assembly Instructions download file View PDF


View FAQs

Warranty Registration

Submit Warranty Registration Warning