XUnited States (en)
Firewood Processors & Conveyors
Skidding Winches & Plates
Log Loader Trailers
Backhoes & Skid Diggers
PLUS SHIPPING CHARGES
Price does not include mounting kit or bucket.
+ 3-Point Hitch Mount
Turn your tractor into a backhoe with the simple 3-point hitch mount. The 3-point hitch also utilizes your tractor’s draw bar for increased rigidity.
+ Choose Your Colour
With Wallenstein you have a choice. Products are available in seven solid colors as well as Realtree EDGE™ and Realtree EDGE™ Shadows camouflage. $250 price premium for Realtree camouflage.
+ Curved Boom
Protects backhoe from unnecessary damage while preventing ground from falling back into the hole.
+ Dual Swing Cylinders
Dual cylinders provide strong, consistent movement throughout the entire 180-degree range.
+ Greaseable Pins
Maintenance is easy with greasable pins on all pivot points.
+ Hardened Steel Bushings
To reduce wear, hardened steel bushings are installed on all the main pivot points.
+ Hydraulic Stabilizers
Easy to use hydraulic stabilizers help to prevent tipping.
+ Replaceable Teeth
Our pin-on bucket teeth allow you to swap out worn or damaged teeth and get back to work as soon as possible.
+ Skidsteer Mount
The universal quick attach plate connects easily to most skidsteers.
+ Subframe Mounting
Allows your tractor to safely handle the stresses developed by digging with a backhoe attachment.
+ Swing Cushioning
When swinging the boom to the extreme ends, hydraulic cushioning gracefully brings the boom to a controlled stop.
+ 12" Bucket BK2120
3 teeth Bucket volume: 1.2 cubic ft
+ 15" Bucket BK2150
4 teeth Bucket volume: 1.5 cubic ft
+ 18" Bucket BK2180
4 teeth Bucket volume: 1.8 cubic ft
+ 24" Bucket BK2240
5 teeth Bucket volume: 2.4 cubic ft
+ 24" Ditching Bucket BK2240D
No teeth Bucket volume: 2.4 cubic ft
+ 36" Ditching Bucket BK2360
No teeth Bucket volume: 3.6 cubic ft
+ 9" Bucket BK2900
3 teeth Bucket volume: 0.8416 cubic ft
+ Cat I 3PH Mount PT302
Cat I: For older low HP tractors which have no subframe available. Light duty only.
+ Cat II 3PH Mount PT322
Cat II: For tractors between 70-100 HP that do not require a subframe.
+ Greaseable Pins 3012M209
For use with BT7220. 2 pins required with each additional bucket. Sold individually.
+ Hydraulic Thumb BT5300
Factory install only.
+ Mechanical Thumb BT5290
Clamp on mechanical thumb.
+ PTO Pump Kit PTO72
Required when mounting a Wallenstein backhoe on a tractor which has no or limited hydraulics and will provide 7 gpm flow sufficient to power the backhoe. The PTO Pump Kit consists of a PTO mounted hydraulic pump, hydraulic tank with return hose, fittings and hardware.
+ Quick Change Bucket Adapter BT7220
Quickly switch between your different buckets. 2 pins required for each additional bucket.
+ Ripper Tooth BT7230
For breaking up hard ground.
+ Street Pad Kit BP230
Keep the stabilizer teeth from tearing up your driveway.
+ Subframe (Specify Part Number When Ordering) Subframe
Some tractors have the required horsepower to operate a backhoe but do not have the structural strength to handle the stresses a backhoe will place on the tractor frame. To solve that problem a backhoe subframe is required to strengthen and distribute the stress more evenly along the entire frame.
Wallenstein Equipment makes every effort to design subframes that fit correctly. However, it may be necessary to modify the subframe at the time of installation due to ongoing tractor manufacturer design changes.
+ Tieback (Specify Part Number When Ordering) Tieback
Must be combined with the SQ500.
+ Universal Quick Attach Plate SQ500
Includes flat faced couplers & turnbuckles. Requires tieback.
+ Vertical Stabilizer Kit BT7240
For stability in tight spaces
Product specifications are subject to change and may not be as shown.
For Installation of Wallenstein Backhoe Products on Category II Tractors. Adapts GX720, GX920 & GX920XT Wallenstein Backhoe products for three-point hitch installation.
Wallenstein PTO Hydraulic Pump Kit is required when mounting a Wallenstein backhoe on a tractor which has no or limited hydraulics and will provide a 7GPM flow sufficient to power the back hoe. The PTO62 is used when mounting a GX620 Wallenstein backhoe, and the PTO72 is used when mounting a GX720, GX920 or GX920XT Wallenstein backhoe.
Covers Thumb Kits: BT5230, BT5250, BT5260, BT5270, BT5280, BT5290, BT5300, BT5310 & BT5320
What brand is your ATV?
What model of ATV is it?